<p dir="ltr">HermesLite appeared in the QtRadio servers list, and able to connect yesterday no problem.</p>
<p dir="ltr">Compared it to my local Hermes (two instances of QtRadio), could not see or hear any significant differences while monitoring a 20m SSB QSO. </p>
<p dir="ltr">Fantastic work!</p>
<p dir="ltr">73 Kevin</p>
<div class="gmail_quote">On Apr 13, 2014 6:09 PM, "Steve Haynal" <<a href="mailto:softerhardware@gmail.com">softerhardware@gmail.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr"><div><br></div><div>Hello List,</div><div><br></div><div>I have been working on a lower cost variant of the Hermes which I am calling Hermes-Lite. All the details are at </div><div><br></div><div><a href="https://github.com/softerhardware/Hermes-Lite" target="_blank">https://github.com/softerhardware/Hermes-Lite</a></div>
<div><br></div><div>Rob Frohne, KL7NA, has kindly agreed to host this new radio at his station with a good antenna so that people can listen to it on QtRadio or glSDR. Look for HERMESLITE. Thank you for your work on ghpsdr3-alex.</div>
<div> </div><div><br></div><div>The design is entirely open source and open hardware. The cost of all materials (including the BeMicro SDK board) is around $150. The FPGA firmware is a port of the Hermes RTL and is compatible enough to work with existing Hermes software. The ADC/DAC is the AD9866 12-bit integrated device intended for cable modems which I have repurposed as a 0-36 MHz transceiver. RX/TX tests of my prototype show good performance. The github site has instructions for listening to the receiver online.  </div>
<div><br></div><div>I had hoped to have a more polished project before releasing, but I am starting a new job tomorrow and will have limited time for this project. Any help on this project or derivatives is welcome.</div>
<div><br></div><div><br></div><div>73,</div><div><br></div><div>Steve</div><div>KF7O</div></div>

<p></p>

-- <br>
-- <br>
--------------<br>
To unsubscribe from this group, send email to<br>
<a href="mailto:sdr-widget%2Bunsubscribe@googlegroups.com" target="_blank">sdr-widget+unsubscribe@googlegroups.com</a><br>
For more options, visit this group at<br>
<a href="http://groups.google.com/group/sdr-widget" target="_blank">http://groups.google.com/group/sdr-widget</a><br>
<br>
--- <br>
You received this message because you are subscribed to the Google Groups "sdr-widget" group.<br>
To unsubscribe from this group and stop receiving emails from it, send an email to <a href="mailto:sdr-widget+unsubscribe@googlegroups.com" target="_blank">sdr-widget+unsubscribe@googlegroups.com</a>.<br>
For more options, visit <a href="https://groups.google.com/d/optout" target="_blank">https://groups.google.com/d/optout</a>.<br>
</blockquote></div>