<div dir="ltr"><div><div><div><br></div>The code for Metis/Hermes modules for gnuradio has been updated.<br><br></div>One user (not me) has multiple Hermes, Metis, and Hermes Lite units<br>on his LAN, and needed a way to select a particular unit when of course<br>they all respond to an HPSDR discovery request.<br><br></div><div>A new field "MAC Addr or *" has been added to both the NarrowBand<br>and WideBand modules to allow specifying an exact MAC address to<br>talk to, or a wildcard "*" to select the first HPSDR module that responds<br>to discovery. The default value is "*" which preserves the current<br>automatic mode where the first HPSDR found on the LAN is used and<br>automatically started without any user intervention.<br><br></div><div>The MAC address is used because an IP address could change if your<br>DHCP server were to be rebooted. The MAC address is permanently<br>attached to a specific device (in theory). Note that MAC address is a<br>string, the documentation tab for the hermesNB and hermesWB<br>modules have examples of the exact string format required.<br><br>>From github:<br><br><a href="https://github.com/Tom-McDermott/gr-hpsdr">https://github.com/Tom-McDermott/gr-hpsdr</a><br><br><br></div><div>From TAPR SVN:<br><br><a href="http://svn.tapr.org/repos_sdr_hpsdr/trunk/N5EG/GRC3.7/gr-hpsdr/">http://svn.tapr.org/repos_sdr_hpsdr/trunk/N5EG/GRC3.7/gr-hpsdr/</a><br><br><br></div><div>-- Tom, N5EG<br><br><br></div></div>