<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">All, <br><br>Orion_v3.7 firmware package download is available at <br><br><a href="http://k5so.com/HPSDR_downloads.html">http://k5so.com/HPSDR_downloads.html</a><br><br>This version of Orion firmware adds an additional CW keying option by using digital input IO4 on Orion; pin 9 on J16 header and pin 9 on the rear panel accessory jack on ANAN-200D, to allow CW straight keying when in iambic CW mode. This change permits the use of AUTO TUNE feature of some external PAs and/or straight key use simultaneously with an iambic key paddle. The input line is debounced, KEY is low (to ground), UNKEY is high via a pull up resistor on the Angelia board. <br><br>The user should ensure that the max external voltage from the keying source should is no more than 3.3V DC when unkeyed; no external voltage is necessary. <br><br>73, Joe K5SO<br><br></body></html>