<html><head></head><body><div style="color:#000; background-color:#fff; font-family:HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:16px"><div id="yui_3_16_0_1_1447107874018_22754">hi all,</div><div id="yui_3_16_0_1_1447107874018_22754" dir="ltr">I was working on an output transformer test to improve my efficiency a little on 6 meters. The type 43 cores in my 1200 watt amplifier run warm on 6 meters so I'm looking at type 61 and type 67 material. </div><div id="yui_3_16_0_1_1447107874018_22754">I wanted to monitor my second harmonic but needed to compare it to the levels monitored by the predistortion pickup going into the main RX. </div><div id="yui_3_16_0_1_1447107874018_22754" dir="ltr">I found that if Hermes is in MON and RX2 modes I could see the fundamental and second harmonic when RX2 was set to twice the frequency. The split screen made it easy to measure my second harmonic, </div><div id="yui_3_16_0_1_1447107874018_22754" dir="ltr">The RX2 S meter does not function in Test or TX modes but the cursor works fine. </div><div id="yui_3_16_0_1_1447107874018_22754" dir="ltr">This adds another cool test feature for testing amplifier performance. </div><div id="yui_3_16_0_1_1447107874018_22754" dir="ltr">I monitor ahead of the low pass filter to see the raw amplifier performance.</div><div id="yui_3_16_0_1_1447107874018_22754" dir="ltr">Does anyone know how to get the S meter working while in TX?</div><div id="yui_3_16_0_1_1447107874018_22754" dir="ltr">Frank,</div></div></body></html>