<div dir="ltr"><div><div><div><div>John:<br><br></div>I think things are normal.<br><br></div>You will also discover that the no-signal bias levels for the transistors will walk around 50 to 100 mA with heat sink temperature, so getting within 10 mA at room temperature is just fine.<br><br></div>Time to send some RF through the PennyWhistle.<br><br></div>--- Graham / KE9H<br><br>==<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Fri, Dec 25, 2015 at 9:44 AM, John Ackermann N8UR <span dir="ltr"><<a href="mailto:jra@febo.com" target="_blank">jra@febo.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">***** High Performance Software Defined Radio Discussion List *****<br>
<br>
First of all, happy holidays!<br>
<br>
I'm finally getting around to building up a Pennywhistle to add to my Atlas-based system.<br>
<br>
When I do the bias set procedure, with both pots fully CCW I'm seeing about 8mA current draw, instead of the 20mA referenced in the doc.  I can set the bias for each transistor to 450mA, but the setting is very touchy and it's hard to set closer than within 10mA or so of the target.<br>
<br>
Does this seem normal, or should I be looking for a problem?  I haven't tried applying RF yet...<br>
<br>
Thanks,<br>
John<br>
_______________________________________________<br>
HPSDR Discussion List<br>
To post msg: <a href="mailto:hpsdr@openhpsdr.org" target="_blank">hpsdr@openhpsdr.org</a><br>
Subscription help: <a href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org" rel="noreferrer" target="_blank">http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org</a><br>
HPSDR web page: <a href="http://openhpsdr.org" rel="noreferrer" target="_blank">http://openhpsdr.org</a><br>
Archives: <a href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/" rel="noreferrer" target="_blank">http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/</a><br>
</blockquote></div><br></div>