<div dir="ltr">HI Roger<div><br></div><div>Ok .... I can use a FTDI RS232 module and make it as a ppt-module that is ok, I will try it out later today...</div><div><br></div><div>then I have to figure out how to control my local "com/usb-port" at my local PC and let it controll the PTT</div><div>at powersdr at the remote,</div><div><br></div><div>73" Bent</div></div><div class="gmail_extra"><br><div class="gmail_quote">2016-03-09 6:49 GMT+01:00 Roger Rehr <span dir="ltr"><<a href="mailto:w3sz73@gmail.com" target="_blank">w3sz73@gmail.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Bent,<br>
<br>
I use a USB-Serial adapter with one side of a footswitch connected to<br>
Pin 1 [carrier detect] through a 10K resistor and the return from the<br>
footswitch to Pin 7 [RTS], with RTS always high.<br>
<br>
There is some more detail on page 22 of this pdf file:<br>
<a href="http://www.nitehawk.com/w3sz/W3SZ_OpenHPSDR_for_VHF_UHF_Microwave3pt0.pdf" rel="noreferrer" target="_blank">http://www.nitehawk.com/w3sz/W3SZ_OpenHPSDR_for_VHF_UHF_Microwave3pt0.pdf</a><br>
<br>
But to do that you have to have software written to take advantage of<br>
such a switch.<br>
<br>
Lacking such software, an Arduino with an Ethernet shield [or any other<br>
SBC with similar IO capability] at the remote site would be a nice and<br>
simple way to do it.<br>
<br>
At the client end you could have either a software switch/button on the<br>
computer screen or a hardware switch hooked up as I described first in<br>
this email [or both, as I do here] causing a simple program at the<br>
client end to send the signal to the remote SBC to activate the PTT.<br>
I've used UDP over a multi-mile wireless link between my home and my<br>
remote station and have had no problems with dropped packets / lost<br>
commands / etc.<br>
<br>
I am not at all current regarding the details of the new openHPSDR<br>
protocol / firmware / software that has been in the works but I would<br>
be surprised if the remote capability you seek is not included<br>
somewhere in those offerings.  But with Arduino Uno R3 equivalents<br>
available from China for less than 4 USD with free shipping, there is<br>
no need to wait and nothing lost if you implement your solution and<br>
then the new openHPSDR offerings render it unnecessary shortly<br>
thereafter.<br>
<br>
73,<br>
<br>
Roger Rehr<br>
W3SZ<br>
<br>
On Wed, 9 Mar 2016 06:03:51 +0100<br>
Bent Andersen <<a href="mailto:eskolin@gmail.com">eskolin@gmail.com</a>> wrote:<br>
<br>
> ***** High Performance Software Defined Radio Discussion List *****<br>
><br>
><br>
<br>
</blockquote></div><br></div>