<div dir="ltr"><div><div><div>Dom,<br><br></div>I would think that the spurs you see are generated on the Hermes board, the drifting birdie may be due to an SMPS in the shack or the Hermes SMPS, I would suggest the following:<br><br></div>Check the Tx output of Hermes on the spectrum Analyzer to see if you are seeing the same fixed -60/-63 dB spurs, I would suggest a firmware update if you are not using the latest version.<br><br></div><div>The PA is simply amplifying the input (unless it's self oscillating, in which you would see a lot of junk on your SA), the spurs are also too far separated from the f0 to be IMD products.<br><br></div><div>Abhi<br></div><div><br></div><br></div>