<div dir="ltr"><div><div><div><div>Helmut, and Terry,<br><br></div>I've been working on a Homebrew RP transceiver design for most of this year. I'm on the 4th iteration of the board.<br><br></div>Today I also took my first stab at creating a github repository.  You'll find the Kicad schematics and gerbers for the board there:<br><br><a href="https://github.com/ka6s/rp_adapter">https://github.com/ka6s/rp_adapter</a><br><br></div>The board is based heavily on work done by OpenHPSDR.  I've incorporated the LPU, T/R relay and 1W PA design from Penelope into the board. (Note - any layout issues etc are mine as these are complete re-layouts).  The board has an 18db-ish LNA incorporated into it along with control for an external RX/TX filter.  It is BUILT to match up with the cabling required by the EB104.ru HERMES RX filter, and their 300W LPF board.  The boards are about $100ish US each -so the price is right. <br></div><div><br></div><div>I'm using a Raspberry Pi 3 + LCD to provide a GUI control of the unit running John Melton, G0ORX's PiHPSDR code. Here is a video of the basic unit if you want to see what I've put together.<br><br><a href="https://www.facebook.com/dontwantemailhere/videos/vb.1345107848/10210568670396717/?type=2&theater">https://www.facebook.com/dontwantemailhere/videos/vb.1345107848/10210568670396717/?type=2&theater</a><br><br></div><div>I have been having a BLAST working on this.  It has been frustrating and rewarding at the same time ;-)  <br><br></div><div>One thing I'll mention that you can't see in the video - there is a 9:1 UnUn between the LNA and the RP. This is a MUST.  It is a practical solution to the RPs high input impedance. <br><br></div><div>Hope you find it interesting.<br><br></div><div>73 de Steve KA6S<br><br></div><div>(and many many many thanks to Phil, John Melton, and all the others that have put the OpenHPSDR systems together!)<br></div></div>