<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<p>Hi John,</p>
<p>I think that should work; however, which RX needs to be mapped to
ADC2 depends upon the radio model, in particular, which
transceiver board is used in the radio.</p>
<p>Hermes-14bit: RX1</p>
<p>Hermes-16bit: RX3</p>
<p>Angelia: RX4</p>
<p>Orion: RX4</p>
<p>Hope that helps.</p>
<p>73,</p>
<p>Warren NR0V<br>
</p>
<o:p></o:p>
<blockquote
cite="mid:888FC1A46449D04EA4E340F7BC2621112736D1CB@wcosexch01k.cos.is.keysight.com"
type="cite">
<div class="WordSection1">
<p class="MsoNormal">It appears I have a hardware issue with my
ADC1 hardware. Signals measure 10dB more IMD than the signal
contains with two tone testing. ADC2 is OK.<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">I remapped RX1 to ADC2 as a temporary fix
and moved my swapped the RX connections. I was hoping I would
be enjoying the pleasures of Pure Sig, but amp view only fills
with noise. Is there a way to route ADC2 to PS?<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Thanks,<o:p></o:p></p>
<p class="MsoNormal">John<o:p></o:p></p>
</div>
</blockquote>
</body>
</html>