<div dir="ltr"><div class="gmail_quote"><div dir="ltr">Alain-Michel,<div><br></div><div>It would appear you are trying to use Method 2. Set PTT to None and do not use it. Use only the Key Line.</div><div><br></div><div>73,</div><div><br></div><div>Scott<br><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Jan 25, 2017 at 12:59 PM, Alain-Michel.Jolivet <span dir="ltr"><<a href="mailto:a.m.jolivet@free.fr" target="_blank">a.m.jolivet@free.fr</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
<p>Hello Scott</p>
<p>The problem is no signal générated from penelope to PA</p>
<p>PTT is activated but no HF.</p>
<p>73!</p>
<p>Alain-Michel</p>
<p>F4GQY<br>
</p>
<br>
<div class="m_6773932088984018992m_5168083666265235842moz-cite-prefix">Le 25/01/2017 à 16:57, Scott Traurig a
écrit :<br>
</div>
<blockquote type="cite">
<div dir="ltr">Hello Alain-Michel,
<div><br>
</div>
<div>This is easy to do. There are two methods. Using your COM3
as an example COM port (assumed to be a standard 9 pin D-style
connector):</div>
<div><br>
</div>
<div>Method 1, paddle/iambic key,</div>
<div>- In Setup > DSP > CW set Primary to COM3 and
Secondary to None.</div>
<div>- Attach the DIT connection to the DSR input on pin 6</div>
<div>- Attach the DAH connection to the CTS input on pin 8</div>
<div>- You can use usually use the RTS output on pin 7 as the
common connection, the DTR output on pin 4 can also be used.</div>
<div><br>
</div>
<div>Method 2, straight key or external keyer output,</div>
<div>- In Setup > DSP > CW set Secondary to COM3 and
Primary to Radio or None</div>
<div>- In Setup > DSP > CW set PTT Line to None and Key
Line to RTS</div>
<div>- Attach the key across the RTS output on pin 7 and the CTS
input on pin 8</div>
<div>- (Alternate arrangement: set Key Line to DTR, attach key
across DTR output on pin 4 and DSR input on pin 6)</div>
<div><br>
</div>
<div>Note that the PowerSDR mRX software will NOT generate
sidetone locally on VAC. If you need local sidetone, the best
method is to use an external, desktop keyer with a built in
sidetone generator and feed the straight key output of that to
the PC using Method 2 above.</div>
<div><br>
</div>
<div>73!</div>
<div><br>
</div>
<div>Scott/w-u-2-o</div>
<div><br>
</div>
<div>
<div>
<div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sun, Jan 22, 2017 at 9:48
AM, Alain-Michel.Jolivet <span dir="ltr"><<a href="mailto:a.m.jolivet@free.fr" target="_blank">a.m.jolivet@free.fr</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">***** High
Performance Software Defined Radio Discussion List
*****<br>
<br>
>From Alain-Michel F4GQY<br>
<br>
problem key connection CW on poweSDR.<br>
<br>
I wish use key connected on serial port on my PC.
PANDORA is not near shack; the alone link is RJ45
network cable.<br>
<br>
Setup -> CAT Control: PPT Control: Enable PTT not
checked; Port: COM3 (physical serial port thru USB)
RTS and DTR checked.<br>
Setup -> DSP -> CW: Connections: Primary
:Radio; Secondary COM3; PTT Line: RTS; Key Line:
DTR; Option Mode B checked.<br>
<br>
In this case Key is not operative<br>
<br>
I had test physicaly on pin port:<br>
for PTT Line = DTR, PTT is activated on pin 6 DSR
(input pin for computer that is correct) MOX goes UP<br>
for PTT Line = RTS, PTT is activated on pin 8 CTS
(input pin for computer that is correct) MOX goes UP<br>
pin 8 and 6 are OK.<br>
<br>
but if PTT Line = DTR and Key Line = RTS PTT goes up
(pin 6) but key signal on pin 8 is not opérative.<br>
if PTT Line = RTS and Key Line = DTR PTT goes up
(pin 8) but key signal on pin 6 is not opérative.<br>
<br>
What is wrong ?<br>
<br>
PowerSDR OpenHPSDR mRX PS v3.3.9(6/15/16)<br>
<br>
Metis v2.9<br>
Mercury v3.4<br>
penelope v2.9<br>
<br>
Thank you for help.<br>
Alain-Michel<br>
F4GQY<br>
<br>
______________________________<wbr>_________________<br>
HPSDR Discussion List<br>
To post msg: <a href="mailto:hpsdr@openhpsdr.org" target="_blank">hpsdr@openhpsdr.org</a><br>
Subscription help: <a href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org" rel="noreferrer" target="_blank">http://lists.openhpsdr.org/lis<wbr>tinfo.cgi/hpsdr-openhpsdr.org</a><br>
HPSDR web page: <a href="http://openhpsdr.org" rel="noreferrer" target="_blank">http://openhpsdr.org</a><br>
Archives: <a href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/" rel="noreferrer" target="_blank">http://lists.openhpsdr.org/pip<wbr>ermail/hpsdr-openhpsdr.org/</a><br>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</div>
</div>
</blockquote>
<br>
</div>
</blockquote></div><br></div></div></div>
</div><br></div>