<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<p>I have pushed release v1.1.0-beta to github and it is now
available for download.</p>
<p>This are significant changes to the existing piHPSDR software.
The major changes include:</p>
<blockquote>2 Receiver support<br>
Split mode operation (VFO-A and VFO-B)<br>
Support for both original and new protocols and also USB support
of Ozy based ATLAS systems.<br>
Support for DLE8000 dual filters.<br>
TCP/IP Cat interface (3 ports) emulating the TS-2000 command set.<br>
</blockquote>
<p>Please be aware that when running 2 receivers at 192000 samples
per second the Raspberry Pi 3 starts to run hot, which is shown on
the screen as a thermometer appearing on the top right of the
display. I have found that putting a small heat sink on the
processor chip resolves the problem.<br>
</p>
<p>Also note that this build does not include FreeDV or PSK modes.
It is still in the source but needs some work after all the
changes.<br>
</p>
<p>To install this release follow the install instructions which can
be downloaded from:</p>
<p>
<a class="moz-txt-link-freetext" href="https://github.com/g0orx/pihpsdr/blob/master/release/documentation/pihpsdr-install.pdf">https://github.com/g0orx/pihpsdr/blob/master/release/documentation/pihpsdr-install.pdf</a></p>
<p>A preliminary user manual can be downloaded from:</p>
<p>
<a class="moz-txt-link-freetext" href="https://github.com/g0orx/pihpsdr/blob/master/release/documentation/piHPSDR-Controller-Users-Guide-v1.1.0.pdf">https://github.com/g0orx/pihpsdr/blob/master/release/documentation/piHPSDR-Controller-Users-Guide-v1.1.0.pdf</a></p>
<p>73,</p>
<p>John g0orx/n6lyt<br>
</p>
</body>
</html>