<div dir="auto">Hi Kjell,<div dir="auto"><br></div><div dir="auto">Thanks for the update.  Originally I only allowed one noise function active but decided to allow any combination. At high sample rates it does start to suffer.</div><div dir="auto"><br></div><div dir="auto">This is still only a beta release so hopefully I can get some time to improve the performance. I still need to port the latest wdsp to be able to use the low latency filters. My initial look at showed that some new Windows muted and thread functions were being used that needed some thought.</div><div dir="auto"><br></div><div dir="auto">I have done some tests with APOLLO but let me know if you have any problems.</div><div dir="auto"><br></div><div dir="auto">-- John </div></div><div class="gmail_extra"><br><div class="gmail_quote">On 13 Feb 2017 21:03, "Kjell Karlsen" <<a href="mailto:la2ni@online.no">la2ni@online.no</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi John.<br>
<br>
Thank you for the update of PiHPSDR!<br>
<br>
For a long time I have not had time to follow and test the Beta versions but now I have decided to take e look at it. I use the ANAN-200 for testing. I had to take Hermes and Apollo out of the box I had with me to Fr.hafen but I am going to install them back together with PiHPSDR soon. Now the PiHPSDR controller is so good that I might use it as my main portable rig!<br>
<br>
So far it seems to be fine. I tested the transmitter part of it and I can not see any significant delay from I talk and till the RF is going out. And the reports I get are very good. I have not tested with 2 receivers so far.<br>
<br>
I had to swap the outputs from the main encoder to get the tuning right.<br>
<br>
I really like the possibility to use all 3 small encoders for different functions. That is perfect.<br>
<br>
I had one problem after I selected both NR2 and SNB. I also used 192 KHz sampling rate as far as I remember. It worked for some time but after a while the GUI stopped working. The RX still worked but it was impossible to use anything on the controller. I had to remove the power to stop all working. After that, when starting, I could hear the RX working but the display did not come fully up, only part of it was shown and I had no control of anything.<br>
<br>
The solution for me was to delete the pihpsdr directory and extract the pihpsdr.tar file again and run install.sh. Then everything worked fine after a new generation of the wisdom file. I´ll try to avoid using so much processing power!<br>
<br>
Very good work, John!<br>
<br>
73, Kjell<br>
<br>
<br>
<br>
På Mon, 13 Feb 2017 12:41:23 +0100, skrev John Melton <<a href="mailto:john.d.melton@googlemail.com" target="_blank">john.d.melton@googlemail.com</a>><wbr>:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
***** High Performance Software Defined Radio Discussion List *****<br>
<br>
</blockquote>
<br>
<br>
-- <br>
Sendt med Operas e-postklient: <a href="http://www.opera.com/mail/" rel="noreferrer" target="_blank">http://www.opera.com/mail/</a><br>
</blockquote></div></div>