<div dir="ltr">In the PowerSDR implementation there already is an essentially fixed audio output path for digital:<div><br></div><div>Just put your RX1 AF and RX2 AF controls at 100 and leave them there. Never touch them. Meanwhile the Master AF only controls the output of the speaker.</div><div><br></div><div>If you say that you are using the speaker output for digital via sound card interface and this won't work, well, all I can say is you should be using VAC ;-)</div><div><br></div><div>Indeed, we need a "VAC0" that is the same stream that goes to the speakers so those of us who are virtualized and/or remoted can get the audio stream that supports MultiRX.<br></div><div><br></div><div>73,</div><div><br></div><div>Scott/w-u-2-o</div><div><br></div><div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, May 28, 2017 at 4:08 PM, K4KV <span dir="ltr"><<a href="mailto:k4kv@k4kv.com" target="_blank">k4kv@k4kv.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">***** High Performance Software Defined Radio Discussion List *****<br><br>
I know this is probably a firmware issue, but not having a FIXED rx audio output is a pain for digital.<br>
<br>
I for one would like to turn off the speakers during digital.  I do not use the I/Q direct output feature to<br>
<br>
another piece of software that might could cure this problem.<br></blockquote></div></div></div></div>