<div dir="ltr">You use the "Board Programmer" section.<div><br></div><div>Get out your Sharpie. Power cycle the radio. Try discovery with Bootloader. If it works, mark the position of the switch. If it doesn't, move the switch, cycle radio power, try discovery again. It should work that time. Mark the position of the switch.</div><div><br></div><div>--Scott </div><div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Jul 30, 2017 at 2:50 PM, ad0es <span dir="ltr"><<a href="mailto:ad0es@ad0es.net" target="_blank">ad0es@ad0es.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">***** High Performance Software Defined Radio Discussion List *****<br>
<br>
 I found:<br>
<br>
<a href="https://github.com/TAPR/OpenHPSDR-SVN/blob/master/KV0S/hpsdr-programmers/Release/HPSDRBootloader-debian-64.tar.gz" rel="noreferrer" target="_blank">https://github.com/TAPR/OpenHP<wbr>SDR-SVN/blob/master/KV0S/<wbr>hpsdr-programmers/Release/<wbr>HPSDRBootloader-debian-64.tar.<wbr>gz</a><br>
<br>
Which seems to talk to the anan, find its MAC and read its IP address<br>
<br>
What is the appropriate jumper position on the bottom of the anan200D for programming, like an idiot I moved it back<br>
and forth without recording the original position.<br>
<br>
Which menu do I use for Bootloader mode,<br>
<br>
Board Programmer,<br>
or<br>
Use board as a jtag programmer.<br>
<br></blockquote></div></div></div></div>