<div dir="ltr"><div>Hello Group</div><div><br></div>Has anybody ever expirienced a dead mic input and cured it?<div>Input via VAC is ok. I already checked the mic, tried another pc, reloaded the firmware, reset the data base, on Angelia the path from the 3.5 mm mic input connector to U2 with an Ohm meter. All  seems to be ok. I didn't check C3 (10 µF, not really possible with an Ohm meter) and I am not sure If maybe D3 (BAT54S) is blown but at least it is not shorted to ground.  I can not really imagine that U2 (TLV320AIC23B) is defective but who knows. </div><div><br></div><div>Any ideas? I'm tearing hairs off...</div><div><br></div><div>Jan</div><div>DL2HBJ</div></div>