<div dir="ltr">Hello HPSDR'ers,<div><br></div><div>I upgraded my Metis board with the version 3.0 rbf that's on the Github site and now it doesn't respond.</div><div><br></div><div>It will only respond when using the HPSDR Programmer with the version 3.0 rbf loaded.</div><div><br></div><div>I have an older version of Quartus v13.x installed on my shack computer, and I put version 1.7 back onto Metis using the USB Blaster and after making that build Metis will work no matter what position I have JP2 in.</div><div><br></div><div>If I try and put v2.9 back on - which is what I had previously, no matter what position I put JP2 on, it won't connect (no ethernet activity - won't respond to ping, etc.) - but of course the power LEDs are fine.</div><div><br></div><div>So, anyone know what's going on?</div><div><br></div><div>Metis is working in this mode OK - it'll connect to v3.4.9 of PowerSDR, but it's just limping along right now.</div><div><br></div><div>Is there a way to program Metis using the USB Blaster connection on the JTAG port?</div><div><br></div><div>Thanks In Advance.</div><div><br></div><div>73's,</div><div>John</div><div>AJ6BC</div><div><br></div><div><br></div><div><br></div></div>