<div dir="ltr">OK - a few edits:<div><br></div><div>Metis only responds if I use the HPSDR Programmer if version 3.0 rbf is loaded - it won't respond to anything else - no activity lights.</div><div><br></div><div>I made a build - version 1.7 - loaded that with the HPSDR Programmer - and that works - getting activity LEDs no matter what position JP2 is in.  </div><div>USB Blaster can't successfully program - and maybe the board really isn't designed to support the USB Blaster - I'm just trying to remember all of this right now.</div><div><br></div><div>If I put version 2.9 back on - which is what was there previously - I get the same result - no LED activity.</div><div><br></div><div>So, any help/clues appreciated.</div><div><br></div><div>I using Protocol-1 on the Atlas backplane.</div><div><br></div><div>73's,</div><div>John</div><div>AJ6BC</div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Jul 23, 2018 at 4:38 PM, John C. Westmoreland, P.E. <span dir="ltr"><<a href="mailto:john@westmorelandengineering.com" target="_blank">john@westmorelandengineering.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hello HPSDR'ers,<div><br></div><div>I upgraded my Metis board with the version 3.0 rbf that's on the Github site and now it doesn't respond.</div><div><br></div><div>It will only respond when using the HPSDR Programmer with the version 3.0 rbf loaded.</div><div><br></div><div>I have an older version of Quartus v13.x installed on my shack computer, and I put version 1.7 back onto Metis using the USB Blaster and after making that build Metis will work no matter what position I have JP2 in.</div><div><br></div><div>If I try and put v2.9 back on - which is what I had previously, no matter what position I put JP2 on, it won't connect (no ethernet activity - won't respond to ping, etc.) - but of course the power LEDs are fine.</div><div><br></div><div>So, anyone know what's going on?</div><div><br></div><div>Metis is working in this mode OK - it'll connect to v3.4.9 of PowerSDR, but it's just limping along right now.</div><div><br></div><div>Is there a way to program Metis using the USB Blaster connection on the JTAG port?</div><div><br></div><div>Thanks In Advance.</div><div><br></div><div>73's,</div><div>John</div><div>AJ6BC</div><div><br></div><div><br></div><div><br></div></div>
</blockquote></div><br></div>