<div dir="ltr">Chris,<div><br></div><div>I agree about linHPSDR - I do have a couple of Linux machines and was considering hooking one up to look at linHPSDR.</div><div><br></div><div>One caveat I noticed with PowerSDR and WSJT-X on the Windows side - on the CAT emulation you need to select PowerSDR on the SDR console and TS-2000 on the WSJT-X settings (at least version 1.9.1) or it won't work correctly - at least this is true under Vista-64.</div><div><br></div><div>I also use one of the LDG Tuners - you have to be careful with those obviously at low power as well - or you can get into a similar situation as you pointed out. </div><div><br></div><div>I just made contact with Tasmania with only 4W on 40m - so yes, it's a lot of fun.</div><div><br></div><div>Thanks for your reply.</div><div><br></div><div>73's,</div><div>John</div><div>AJ6BC</div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Jul 26, 2018 at 11:28 PM, Chris Smith <span dir="ltr"><<a href="mailto:chris@vspl.co.uk" target="_blank">chris@vspl.co.uk</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi John<br>
<br>
Just so that you know you’re not howling at the moon ...<br>
<br>
I don’t use Windows so I was very happy when John Melton came up with linHPSDR.<br>
<br>
Built into that is CAT control from WSJT-X which works well and doesn’t require any external cables or add-on software like VAC. It works via a TCP/UDP port. All good stuff and makes the various protocols available via WSJT-X very easy to implement.<br>
<br>
One bijou problemette I have is that when using very low power (typically < 5W) my PA, which is auto switching, doesn’t switch and takes no part in the amplifier chain. So the power is further reduced. In order to use WSJT-X in low power mode I have to remove the PA from circuit and use different settings in the PA config in linHPSDR.<br>
<br>
Buy yes, a lot of fun.<br>
<br>
73 de Chris G4NUX<br>
<br>
<br>
> On 27 Jul 2018, at 04:26, John C. Westmoreland, P.E. <<a href="mailto:john@westmorelandengineering.com">john@westmorelandengineering.<wbr>com</a>> wrote:<br>
> <br>
> ***** High Performance Software Defined Radio Discussion List *****<br>
<div><div class="h5">> <br>
> HPSDR'ers,<br>
> <br>
> Hello - anyone there?  Maybe I've been shadow banned?  Ha!<br>
> <br>
> Got WSJT-X working with Open(PowerSDR) using virtual com ports and VACs under Vista-64 - and made two contacts just now (after fixing U6 on Penny) - but this is a lot of fun ('just' using 10W with the power amp).<br>
> <br>
> In case there's someone out there that may be curious - I can do a quick write up - but it's pretty much like the link above with a few exceptions - that are obviously kind of important.<br>
> <br>
> Anyway - a lot of fun, right?<br>
> <br>
> 73's,<br>
> John<br>
> AJ6BC<br>
> <br>
> <br>
> On Wed, Jul 25, 2018 at 8:25 AM, John C. Westmoreland, P.E. <<a href="mailto:john@westmorelandengineering.com">john@westmorelandengineering.<wbr>com</a>> wrote:<br>
> ...OK - so this works - maybe not with the recommended virtual com port drivers but I have WSJT-X working in receive mode now - my PTT isn't happy but it's pretty cool to see this working with OpenHPSDR/PowerSDR via the CAT I/F - I'm emulating the Kenwood TS-2000.<br>
> <br>
> 73's,<br>
> John<br>
> AJ6BC<br>
> <br>
> <br>
> On Wed, Jul 25, 2018 at 1:43 AM, John C. Westmoreland, P.E. <<a href="mailto:john@westmorelandengineering.com">john@westmorelandengineering.<wbr>com</a>> wrote:<br>
> Hello HPSDR'ers,<br>
> <br>
> LinHPSDR sounds interesting.<br>
> <br>
> Will something like this possibly work?<br>
> <a href="http://kc.flexradio.com/KnowledgebaseArticle50345.aspx" rel="noreferrer" target="_blank">http://kc.flexradio.com/<wbr>KnowledgebaseArticle50345.aspx</a><br>
> <br>
> 73's,<br>
> John<br>
> AJ6BC<br>
> <br>
> <br>
> On Tue, Jul 24, 2018 at 11:55 PM, John C. Westmoreland, P.E. <<a href="mailto:john@westmorelandengineering.com">john@westmorelandengineering.<wbr>com</a>> wrote:<br>
> Hello HPSDR'ers,<br>
> <br>
> There's probably an old thread on this - but I was wondering how many of you are running WSJT-X with Protocol-1 (Pandora Chassis) - and any hints on building the CAT interface cable.<br>
> <br>
> I suppose this is fairly straight forward (?) - but wanted to ask since I'm sure someone on this list has already done this.<br>
> <br>
> Just wondering if you interfaced via Penelope/PennyLane or Metis and what you used for the rig control I/F - like maybe a cable connected to a Rig Blaster?<br>
> <br>
> Thanks In Advance!<br>
> <br>
> 73's,<br>
> John<br>
> AJ6BC<br>
> <br>
> <br>
> <br>
> <br>
</div></div>> ______________________________<wbr>_________________<br>
> HPSDR Discussion List<br>
> To post msg: <a href="mailto:hpsdr@openhpsdr.org">hpsdr@openhpsdr.org</a><br>
> Subscription help: <a href="http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org" rel="noreferrer" target="_blank">http://lists.openhpsdr.org/<wbr>listinfo.cgi/hpsdr-openhpsdr.<wbr>org</a><br>
> HPSDR web page: <a href="http://openhpsdr.org" rel="noreferrer" target="_blank">http://openhpsdr.org</a><br>
> Archives: <a href="http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/" rel="noreferrer" target="_blank">http://lists.openhpsdr.org/<wbr>pipermail/hpsdr-openhpsdr.org/</a><br>
<br>
</blockquote></div><br></div>