<div dir="ltr">Hi All,<div><br></div><div>During debugging of Thetis i already found a lot of udp sequence errors.</div><div><br></div><div>In wireshark the reported missing packets are there.</div><div><br></div><div>I looked further in the logging of windows.</div><div><br></div><div>There is see a lot of errors about lost datagrams, also reporting unsufficient spave in the local buffer.</div><div><br></div><div>These problems also occur without debugging modus, just running the latest availble thetis or powersdr software.</div><div><br></div><div>I did some further investigation but could not find a solution.</div><div><br></div><div>Someone did fix this issue?</div><div><br></div><div>73 Johan PA3GSB</div><div><br></div><div><br></div><div>Actual message (dutch language):</div><div>verloren datagram: 2: Proces 0xffffb10c71d4d580, Eindpunt 0xffffb10c76848790, Buffer 0xffffb10c796ea7e0, Lengte 1032, Adres <a href="http://192.168.2.25:1024">192.168.2.25:1024</a>, Seq 10001, Reden Onvoldoende ruimte in lokale buffer<br></div></div>