<div dir="ltr"><div dir="ltr"><div>Georg,</div><div><br></div><div>There has been a progression of SDR boards since Hermes. Next there was the Angelia, then the Orion, then the Orion MKII.</div><div><br></div><div>They are all essentially the same architecture with minor but significant changes.</div><div><br></div><div>The largest difference is that all of the successor designs have a second ADC channel available that is phase locked to the first ADC. Both PowerSDR and Thetis clients support coherent beamforming using this feature (labeled "diversity" in the software).</div><div><br></div><div>The Orion and Orion MKII share the same but much larger FPGA and increased on-board memory. They also boast improved phase noise and clock stability compared to the Hermes resulting in improved IMD on transmit and improved RMDR on receive. Both boards also include an on-board coupler and switching for improved linearization performance with the PureSignal linearization processing built into PowerSDR and Thetis.</div><div><br></div><div>The Orion MKII has a few tweaks that give it a slight edge over the Orion. In particular the ADC preamp has been changed to a 14dB gain part instead of the 20dB part used on predecessor boards. And the RF output level is now controlled by a combination of step attenuator (1dB steps) and the DAC reference voltage (fractional dB steps) instead of only using the DAC reference voltage. Also, the Orion MKII firmware allows control via SPI for a second set of preselectors on ADC2.</div><div><br></div><div>That's it in a nutshell.</div><div><br></div><div>You will find a lot more current news and information here: <a href="https://apache-labs.com/community/index.php">https://apache-labs.com/community/index.php</a></div><div><br></div><div>73,</div><div><br></div><div>Scott/w-u-2-o</div><div> </div><div><br></div><div>The Orion MKII</div><div class="gmail_quote"></div></div></div>