<div dir="ltr"><div dir="ltr"><div>Very little. Mostly just small details. Looking at the SDR boards themselves, if you compare it to the original Hermes design there have been no changes to key components or signal flow in the receiver. It's still the same LPF, step attenuator, preamp and ADC, although in the 7000 and 8000 the preamp has been changed to 14dB gain instead of 20dB gain. This has actually proven to provide superior performance. Along with some change to clock generation (same clocks and clock rates, just different TCXO and layouts) I see 3 or 4dB improvement in my noise floor and activating dither and random in the ADC does not move the noise floor at all. Indeed I leave those features enabled all the time.</div><div><br></div><div>The latest schematic freely available for you inspection is the Apache Orion board, which is two revisions beyond the Hermes (Hermes, then Angelia, then Orion):</div><div><br></div><div><a href="https://apache-labs.com/community/viewtopic.php?f=35&t=2338">https://apache-labs.com/community/viewtopic.php?f=35&t=2338</a><br></div><div><br></div><div>The PA/filter board schematics are there as well.</div><div><br></div><div>You can request from Apache a copy of the Orion MKII schematic, used on the 7000 and 8000, under the auspices of the derivative open source hardware agreement, but Apache has not publicly posted those schematics yet. In addition to the change to a 14dB preamp, the output drive mechanism has also changed. On the Hermes, and all designs prior to the Orion MKII, the DAC reference voltage was used to adjust drive. On the Orion MKII the output of the DAC now goes to another step attenuator. This allows drive to be adjusted in 1dB increments by the attenuator and now the DAC can remain at almost full scale all of the time, with only slight adjustments necessary to DAC reference level for fractional dB adjustments.</div><div><br></div><div>73,</div><div><br></div><div>Scott/w-u-2-o</div><div><br></div><div class="gmail_quote"><div dir="ltr">On Fri, Jan 18, 2019 at 11:29 AM Helmut Oeller <<a href="mailto:dc6ny@gmx.de">dc6ny@gmx.de</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">What is the difference between Apache hardware and HPSDR hardware?<br>
<br>
DC6NY<br>
</blockquote></div></div></div>