<div dir="ltr"><div>George:</div><div><br></div><div>Any modern NIC will invoke Auto-MDI/MDIX protocols which have virtually eliminated the need for crossover cables. Also, there will be no performance improvement from using a switch.</div><div><br></div><div>Kjell:</div><div><br></div><div>You obviously have a router attached to that switch providing DHCP services. You should have mentioned that. That is how the SDR card is getting 10.0.0.61 automatically when attached to the switch. Your PC will also get an address automatically that way.</div><div><br></div><div>Also, it would appear that you had the PC wired port set up for DHCP/APIPA and a fixed address in the SDR card. That will not work when using APIPA. The PC wired port will eventually settle on 169.254.x.x and that is not going to work to talk to an SDR card with an address of 10.0.x.x.</div><div><br></div><div>The EASIEST and generally SAFEST way to connect these things is to always use a switch and router and let the router hand out addresses to everything automatically via DHCP. This will not work for more complex situations (folks who want remote access, etc.), but people who want to create more complex network solutions generally understand what they are doing by definition.</div><div><br></div><div>73,</div><div><br></div><div>Scott</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, May 30, 2019 at 1:46 PM Kjell Karlsen <<a href="mailto:la2ni@online.no">la2ni@online.no</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><u></u>


<div><div>Hi Scott and Georg.</div><div><br></div><div>First: This happened with both Protocols.</div><div><br></div><div>Usually I have had the IP address set  fixed to 10.0.0.xx on the SDR cards and that has normally been no problem.</div><div><br></div><div>I changed the IP address on the SDR card to 0.0.0.0 and now I am able to connect directly. The IP address on the SDR card is now 169.254.170.149.</div><div><br></div><div>If I connect via the switch, the SDR card get 10.0.0.61.</div><div><br></div><div>So now I am happy!!</div><div><br></div><div>Thank you both for the help.</div><div><br></div><div>73, Kjell</div><div><br></div><div><br></div><div id="gmail-m_-1439327875850874454M2Signature"></div></div></blockquote></div></div>