<div dir="auto">Hello,</div><div dir="auto"><br></div><div dir="auto">Today I changed the orientation of Transformer T2, the outout transformer of Penelope, like Pennylane. This is a well known fix for T2 reversal reported years ago.</div><div dir="auto"><br></div><div dir="auto">After this change, the output power of Penelop on, e.g., 40 meters band jumped over 600mW on the forward power of PowerSDR V.3.4.9. The power seems to be uncontrollable, but this is not identified by a power meter, but only on the screen of PowerSDR.</div><div dir="auto"><br></div><div dir="auto">The firmware version of Penelope is 1.8, and before doing this T2 orientation change, thais only yesterday, my Penelope worked fine except 6 meters band’s low power, only 100mW.</div><div dir="auto"><br></div><div dir="auto">I’m afraid this problem might be caused my soldering work on Penelope which damages some parts.</div><div dir="auto"><br></div><div dir="auto">Any comments would be very much appreciated.</div><div dir="auto"><br></div><div dir="auto">73,</div><div dir="auto">Tokio</div><div dir="auto">ja1cca</div>