<div dir="ltr">
<div class="gmail-mail-detail-content gmail-noI18n gmail-simple-mail" style="min-height:100px">

 
 <div id="gmail-ox-a9cf87e1eb">
  <p class="gmail-ox-a9cf87e1eb-ox-f4e924472c-default-style">HERMES RUNNING P2 WITH PS PROBLEM</p>
  <p class="gmail-ox-a9cf87e1eb-ox-f4e924472c-default-style">I would like to ask if anyone running Hermes (or Anan 100/10 using the same board),<br>and running Protocol 2 with Pure Signal 2 have a problem with PS not starting <br>about half the time when activating TX? (No "Feedback" or "Correcting" showing!)<br>I have two Hermes boards (both home made) and they both have the same problem, also<br>a friend has tried and has the same problem.<br>If anyone is running this combination without a problem I would like to hear from<br>them to help my investigation.<br>So far I have managed to modify Thetis to try multiple times to start PS until it<br>works, which can take up to 10 seconds.<br>Of course half the time it starts OK but the other half it can take a bit longer to<br>start and it is necessary to have a signal (talking etc.) for it to work...<br>The problem would appear to be in the firmware (V10.7) as writing the frequencies<br>repeatedly eventually gets the RX signals synchronized correctly and PS works.<br>Other systems using two physical receivers (two ADCs) don't seem have this problem.</p>
  <p class="gmail-ox-a9cf87e1eb-ox-f4e924472c-default-style">Any feedback would be appreciated!</p>
  <p class="gmail-ox-a9cf87e1eb-ox-f4e924472c-default-style">Martin G3OQD.</p></div></div>

</div>