<div dir="ltr"><div>The file size does not matter. If Walter cannot find the board with the Bootloader the file size does not come into play.</div><div><br></div><div>IP addresses do not matter. The Bootloader uses raw Ethernet frames for communications.</div><div><br></div><div>The NIC must be set to 100Mbps. The Bootloader image in the FPGA runs the hardware at 100Mbps. It is unlikely that this is an issue unless Walter explicitly set it to another speed.</div><div><br></div><div>Walter: did you reboot after installing WinPCAP? Have you tested the NIC you are using and the Ethernet cable with any other equipment, are they known good?</div><div><br></div><div>If the above issues are not the easy answer, then it is possible that the board is truly bricked, i.e. that the Bootloader image is not intact. </div><div><br></div><div>73,</div><div><br></div><div>Scott/w-u-2-o</div><div><br></div></div>