<div dir="ltr"><div>Thanks Helmut,</div><div>   For the information! <br></div><div>Yes, I tried V10.3 on my 16bit Hermes and although it worked I still had the same <br></div><div>problem with PS not always working!</div><div>The way I test is, without any PA running, I select "PA-A" then from the "Linearity" menu</div><div>I just press "Two-tone" and when PS is working I get a "Correcting" in yellow and a</div><div>"Feedback" in red appear to the right under the spectrum display.</div><div>I just did this test ten times and five time it worked and five it did not (the yellow correcting <br></div><div>goes out and the red Feedback does not appear)...</div><div>I am using the latest Thetis v2.6.8 but I have had the same problem on all previous versions...</div><div>This problem is the same on three different (all home built) boards</div><div><br></div><div>If you ever try this test on your 14bit Hermes I would be interested in the result?</div><div>It is a bit like tossing a coin, you can get a run or tries when it always works but</div><div>over a number of tries it always seems to average out to roughly %50 - strange.</div><div>I am now messing about with the Verilog firmware code - certainly learning something</div><div>but not fixed the problem yet..........</div><div><br></div><div>73's</div><div><br></div><div>Martin G3OQD.<br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, 6 Nov 2019 at 11:25, Helmut <<a href="mailto:dc6ny@gmx.de">dc6ny@gmx.de</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div lang="DE"><div class="gmail-m_-5016984454178627028WordSection1"><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)"><u></u> <u></u></span></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)" lang="EN-US">Hi Martin,<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)" lang="EN-US"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)" lang="EN-US">I’m using Hermes_v10.3 firmware on the Hermes 14bit working sufficiently stable under Thetis.<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)" lang="EN-US"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)" lang="EN-US">If I recall correctly  the footprints of the LTC 2208 14bit and 16bit are quite identical, but<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)" lang="EN-US">other I/Os of the FPGA  are used. Though  Hermes 16 Bit firmware should fail. BTW my Thetis v2.6.7<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)" lang="EN-US">is asking for v10.3 or higher if older firmware versions are used.<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)" lang="EN-US"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)">73, DC6NY<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:"Calibri","sans-serif";color:rgb(31,73,125)"><u></u> <u></u></span></p><div style="border-color:rgb(181,196,223) currentcolor currentcolor;border-style:solid none none;border-width:1pt medium medium;padding:3pt 0cm 0cm"><p class="MsoNormal"><b><span style="font-size:10pt;font-family:"Tahoma","sans-serif"">Von:</span></b><span style="font-size:10pt;font-family:"Tahoma","sans-serif""> Martin Emmerson [mailto:<a href="mailto:martinhemmerson@gmail.com" target="_blank">martinhemmerson@gmail.com</a>] <br><b>Gesendet:</b> Mittwoch, 6. November 2019 09:05<br><b>An:</b> Helmut<br><b>Cc:</b> Sebastien F4GRX; <a href="mailto:hpsdr@lists.openhpsdr.org" target="_blank">hpsdr@lists.openhpsdr.org</a><br><b>Betreff:</b> Re: [hpsdr] 14bit Hermes Schematic?<u></u><u></u></span></p></div><p class="MsoNormal"><u></u> <u></u></p><div><div><p class="MsoNormal"><span lang="EN-US">Hi Helmut,<u></u><u></u></span></p></div><div><p class="MsoNormal"><span lang="EN-US">   Normally I would agree with you but if you have a new build Hermes board which has<u></u><u></u></span></p></div><div><p class="MsoNormal"><span lang="EN-US">inadvertently had the wrong (smaller capacity) FPGA installed it would be nice to see<u></u><u></u></span></p></div><div><p class="MsoNormal"><span lang="EN-US">if it can work with the smaller 14bit firmware before going through the pain of replacing<u></u><u></u></span></p></div><div><p class="MsoNormal"><span lang="EN-US">the FPGA with the correct one!<u></u><u></u></span></p></div><div><p class="MsoNormal"><span lang="EN-US"><u></u> <u></u></span></p></div><div><p class="MsoNormal"><span lang="EN-US">I would still be most interested to know what version of the protocol 2 firmware you are<u></u><u></u></span></p></div><div><p class="MsoNormal"><span lang="EN-US">running on your 14bit Hermes ?<u></u><u></u></span></p></div><div><p class="MsoNormal"><span lang="EN-US">I have been trying V10.3...<u></u><u></u></span></p></div><div><p class="MsoNormal"><span lang="EN-US"><u></u> <u></u></span></p></div><div><p class="MsoNormal">73's<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">Martin G3OQD.<u></u><u></u></p></div></div><p class="MsoNormal"><u></u> <u></u></p></div><div id="gmail-m_-5016984454178627028DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br> <table style="border-top:1px solid rgb(211,212,222)">
        <tbody><tr>
      <td style="width:55px;padding-top:18px"><a href="http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" target="_blank"><img src="https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png" alt="" style="width: 46px; height: 29px;" width="46" height="29"></a></td>
                <td style="width:470px;padding-top:17px;color:rgb(65,66,78);font-size:13px;font-family:Arial,Helvetica,sans-serif;line-height:18px">Virenfrei. <a href="http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" style="color:rgb(68,83,234)" target="_blank">www.avg.com</a>          </td>
        </tr>
</tbody></table>
<a href="#m_-5016984454178627028_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width="1" height="1"> </a></div></div></blockquote></div>