<div dir="ltr"><div>Hi All,</div><div><br></div><div>Last year I found mails relating to Mercury and PowerSDR by some guys on the list.</div><div><br></div><div>Retrospectively I would like to use HPSDR(Mercury, Panylane, and Metiz) for CW, FT8, as well as PSK.</div><div><br></div><div>I pulled the radio from the shelf and set up PowerSDR. Receiving seems to be fine, but for transmission I have a problem; Drive slider doesn't work properly. Than means the control of TX power is not just what I expect by the slider. The power remains the same until the slider reaches zero, at this point the power output is zero. I measured it using my oscilloscope.</div><div><br></div><div>The version of each board are shown in the attached picture as well as PowerSDR. Is there a need to change the firmware version of my boards? Your help is much appreciated.</div><div><br></div><div>73,</div><div>Tokio</div><div>JA1CCA<br></div></div>