[hpsdr] Janus Alpha Construction

[Bill Tracey]

Lyle -- Are the dimensions of the pads on the gerbers correct -- I get them 
as:

Outer Edge to Outer Edge: 6.35 x 7.06
Center to Center:   4.30 x 5.06
Inner Edge to Inner Edge:  2.02 x 3.11

X x Y in mm

To me it looks like DIgikey: CTX326LVCT-ND  might fit the pads.

Regards,

Bill

>2) The PCB footprint for the oscillator is too large.  It is possible to
>fit the oscillator by first putting blobs of solder on its four pads,
>then pre-tinning the four PCB pads, then carefully placing and
>soldering.  We should find a different oscillator (to match the PCB)
>and/or change the PCB layout in the next round.



 1149745996.0