[hpsdr] SDR-1000 interface board

[Roland ETIENNE]

Hi Phil,

One of my first interest in Janus was to use it in place of classic 
sound card with my SDR1000, so your proposition sounds great for me, if 
all is ok to control the radio via Ozy, so let's go for such an 
interface board, you can count me on!

73, roland f8chk.


Phil Covington a écrit :
> ***** High Performance Software Defined Radio Discussion List *****
>
> [Note: this was originally posted from my gmail account, but for some 
> reason my posts are not making it through to the list.  If a duplicate 
> appears - please excuse.]
>
> Hi all,
>
> The reason for this post is to see if there would be any interest in
> an interface board to integrate a SDR-1000 stack on to the Altlas
> backplane.  What I envision doing is using the SDR-1000's TRX, BPF,
> and RFE board by providing a header for the board stack ( minus the
> PIO board ) to plug into this interface board.  The interface board
> (which will be an Atlas plug in board) will replace the functions of
> the PIO board.  This includes replacing the linear and noisy switching
> regulators on the PIO board.  Control of the DDS, relays, etc.. would
> come from the OZY board.  The JANUS board would be used for the sound
> interface.  Connection to the PC and the PowerSDR software would be
> over one USB connection only - no audio cables.
>
> This will obviously void the SDR-1000 warranty, but many of us have
> older SDR-1000 units that are either out of warranty already or have
> already been modified in some other way not supported by the factory.
> I have a three board stack with RFE board that is gathering dust
> because of continuous problems ( mainly soldering related ) with the
> PIO board.   I would like to get some use out of it.
>
> Anyone interested in such a board?
>
> 73 de Phil N8VB
>
>   


 1158954787.0