[hpsdr] HPSDR Files

[Ken Klein]

Continuing to progress on my personal Ozy/Janus build:

 

I downloaded the Altera Quartus II software and, following the programming
instructions, used a byteblaster and the JTAG port on the Janus to load the
Janus_Ozy.pof file that I found in the Ozy2_Janus2 directory of the .svn
repository.  This is the only file that I loaded, and it loaded
successfully.  (BTW, I found schematics of a byteblaster on the web.  It
looks dead easy to build one, although I haven't done this.)

 

I then found a "HPSDR PROJECT LIBUSB.pdf " document in the .svn repository
here:

 

/trunk/N8VB/OZY_V1/OZY_USB_UTILSV2.0/doc/HPSDR PROJECT LIBUSB

 

 This .pdf is entitled "1.0 Initial OZTY EEPROM C0 Load Programming" .  I
followed these instructions as far as loading the USB firmware and then the
OZYV1FW.hex file onto the Ozy.  All this was successful, including getting
the USB operational.

 

I then tried the upload_FPGA  routine to load blinkity.rbf, but was never
successful at doing this.  Don't know why.

 

However, I was able to successfully use the upload_FPGA routine to load the
Ozy_Janus.rbf file (also found in the Ozy2_Janus2 directory.)

 

So now I THINK that I have a working Ozy/Janus duo loaded with some
Ozy2_Janus2 files.

 

So where do I go from here?  Are these the only files that I need to load
onboard?  Are there other tests that I should/could run?  Where should all
the Ozy jumpers be placed for normal operation?  What else is necessary
besides connecting the SDR and loading the patches to the SDR s/w?

 

Any help gratefully appreciated, of course!

 

Ken WR5H

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20070508/4fdd18ed/attachment-0004.htm>