[hpsdr] FAQ input for Ozy/Janus software download

[Eric Ellison]

Joe/Don

This is indeed correct. There are also distribution restrictions from
Microsoft which apply to posting elsewhere, which we ran into with SDR-1000
Demo disk 2 years ago. .net 1, 2, and 3 are available from Microsoft Update.


>From IE  >Tools>Windows Update> If you don't have Microsoft Update then
subscibe.

Under Optional Updates you will find .Net 1 2 and 3 for download, after
installing, also go back and download the critical patches. They do run in
concert with one another. I have had no problem with all three versions
installed. I think Microsoft will support 1.1 until 2010.
 

Thanks
Eric - AA4SW


-----Original Message-----
From: hpsdr-bounces at hpsdr.org [mailto:hpsdr-bounces at hpsdr.org] On Behalf Of
Joe - AB1DO
Sent: Monday, May 28, 2007 2:54 PM
To: hpsdr at hpsdr.org
Subject: Re: [hpsdr] FAQ input for Ozy/Janus software download

***** High Performance Software Defined Radio Discussion List *****

Michael,

This is indeed correct. The note on .NET V2 is present on page 19, but could

indeed be expanded to mention that it will co-reside with .NET V1. I assumed

that users were already familiar with PowerSDR, and would therefore already 
have .NET V1. Power SDR will automatically detect its presence anyway on 
start-up and if not present, display a message to that effect (see page page

19 of the Flex-Radio SDR-1000 manual v1.8.0).

You are correct that both should be present in the table 1 on page 3 of the 
Ozy/Janus manual. Corrections will be made in the next version of the 
manual.

Thanks for pointing this out,
73 de Joe - AB1DO

----- Original Message ----- 
From: "Michael White" <michael.white at zytac.com>
To: <hpsdr at hpsdr.org>
Sent: Monday, May 28, 2007 14:02
Subject: [hpsdr] FAQ input for Ozy/Janus software download


> ***** High Performance Software Defined Radio Discussion List *****
>
> I discovered that PowerSDR 1.6 (modified) requires .NET V1. At the same
> time Ozyinit.bat requires .NET V2.
>
> Both V1 and V2 of .NET seem to co-reside with no untoward effects on the
> same machine. I suggest this information is inserted into the
> documentation as pre-requisites. Also to guard against  Microsoft deleting
> the URL to V1 or dropping V1 or making it difficult to locate, I would
> suggest placing both of the required .NET framework installers into the
> HPSDR download area. Most people have V2 already installed (by some other
> application) , but V1 was certainly not on any of my machines.
>
> Unless .NET V1 is installed then PowerSDR (modified) will not run and does
> not provide a user friendly error message. (which puzzled me initially).
>
> Once .NET V1 is installed then PowerSDR.exe will run OK without the need
> to run the installer so the files provided (without an installer) are
> adequate. The setup wizard is still available from the PowerSDR menu.
>
> Works a treat.
>
> Michael White
> G3WOE.
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at hpsdr.org
> Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
> HPSDR web page: http://hpsdr.org
> Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/ 

_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at hpsdr.org
Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
HPSDR web page: http://hpsdr.org
Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/


 1180379941.0