[hpsdr] Testing Penelope

[Roland Etienne]

Hi Bill,

Thanks for the rapid answer and sorry for the trouble, but I was 
confident in my mirophone wiring, and the problem was there!!

Now everything is fine, without the need of --ignore-pp-ptt, and audio 
sounds great on a nearby receiver with the Heil PR781 in Penelope!
The next step is to follow Penelope with an old Kenwood TS50 power 
amplifier and filters. It's a small bloc easily removable from the TS50, 
I just modified it a little to be able to command the filters 
commutation and the PTT from Penelope, and I think it will be a fine set!

Really nice and exciting project!

73, Roland f8chk.



Bill Tracey a écrit :
> Roland,
>
> Can you try --ignore-pp-ptt as a startup option on PowerSDR and let me 
> know if you see the same thing?
>
> Regards,
>
> Bill
>
> At 08:46 AM 12/29/2008, Roland Etienne wrote:
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> I had no time to test Penelope before, so I am now trying to use it 
>> before Mercury's arrival...
>> I usually run the SDR 1000 with Ozy-Janus without any problem.
>> To test Penelope on a dummy load, I have only Ozy (slot 5) and 
>> Penelope (slot 4) in Atlas, and no connection with the SDR 1000.
>> Running the last PowerSDR modified (svn 2573), with title bar "KD5TFD 
>> 26 Dec 2008 a) PowerSDR v1.10.1 + Base SVN 2025".
>> I have checked HPSDR Hardware as radio model, and only Penelope as 
>> hpsdr board.
>> When I start PowerSDR, Ozy firmware is loaded, leds on Penelope are 
>> ok, but Power SDR go immediately in TX mode and no hf is coming out 
>> from Penelope!
>>
>> Thanks for help, and season's greetings to everyone!!
>>
>> 73, Roland f8chk.
>
>
>
>


 1230568312.0