[hpsdr] Problem: Ozy/USB malfunction/not recognized

[Daniel Quigley]

Bill, thanks for the response.  Following your suggestions, it turns out a brand new USB cable was the culprit.  I'm happy to say that my HPSDR system works, Penelope transmits and looks good ... heck, my wife is even proud of me :) - Now just waiting for my Mercury board to arrive.
 
Best and 73,
Dan



> Date: Tue, 21 Oct 2008 22:57:30 -0500> To: dquigley at msn.com; hpsdr at hpsdr.org> From: bill at ewjt.com> Subject: Re: [hpsdr] Problem: Ozy/USB malfunction/not recognized> > Hmmm ... any chance the USB port is not USB2 - USB 1.1 hub > perhaps? Can you try a different USB cable? Is the +5v supply on > Atlas stiff - can you measure the current draw on the +5v line?> > If it is reporting 0x0 for VID and PID something is not quite > right. It should be 0xfffe/0x7 (VID/PDI) if the EEPROM on Ozy is > being recognized as programmed and 0x4b4/0x8613 if the EEPROM is not > programmed.> > If that does not do it, any chance of trying another computer to try > and isolate it to being a computer side problem or board side problem?> > Regards,> > Bill (kd5tfd)> > > At 03:09 PM 10/21/2008, Daniel Quigley wrote:> >***** High Performance Software Defined Radio Discussion List *****> >> >> >Hello,> >> >I received Ozy/Atlas/Janus and Penelope boards this past week so I > >am an hpsdr newb. I've read the pdf instructions and searched the > >reflector archives for additional info. However, I am having what > >seems like a very basic problem: my XP system does not recognize Ozy > >USB and reports it as malfunctioning.> >> >Windows XP reports Ozy as a malfunctioning/unknown USB device and > >does not bring up the driver wizard. The USBIO driver is installed > >though and I have tried the manual driver installation > >method. Device manager reports that the Ozy USB device is sending a > >null (0000) VID and 0000 for the first 16 bits of the PID. Voltages > >on the Atlas backplane are good and with the exception of USB ident, > >Ozy (and the others when plugged in) power up as the docs predict.> >> >I am running XP build 2600 SP3 with all subsequent microsoft > >updates. The box is an eMachine laptop; a K8 processor (not running > >64bit) and 1Gb ram. Other USB devices run fine.> >> >Apologies in advance if I have missed something basic. I do need > >some suggestions/help.> >> >Thanks in advance,> >Dan (N7HQ)> >> > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20081028/65d5ea34/attachment-0003.htm>