[hpsdr] Firmware for Penele ope

[Gerd Loch]

I have found what is going on:

My PTT jumper JP4 shorts the mic input when connecting pin1 of the
DSUB25 on Penelope to GND! I have to remove the PTT jumper.

Simple thing but costed me a lot of time.

73, Gerd
DJ8AY


-----Original Message-----
From: Gerd Loch [mailto:g.loch at nt-electronics.de] 
Sent: Thursday, April 16, 2009 2:52 PM
To: 'Phil Harman'
Subject: RE: [hpsdr] Firmware for Peneleope


Hi Phil,

The problem remains the same with your updated .pof file.
My jumpers for the microphone/ptt are left down, middle and right side
up. I am using a microphone that needs bias voltage. I will now search
myself and contact you again, when I can not find what is wrong.

Thanks.
Gerd, DJ8AY




-----Original Message-----
From: Phil Harman [mailto:phil at pharman.org] 
Sent: Thursday, April 16, 2009 1:26 PM
To: g.loch at nt-electronics.de
Subject: Re: [hpsdr] Firmware for Peneleope


Hi Gerd,

I have just loaded the Penelope.pof file into my Penny  board from here

svn://206.216.146.154/svn/repos_sdr_hpsdr/trunk/Penelope

and it works fine.  The PTT on Pin 1 of the DB25 is OK and the
microphone 
works as well.

I've refreshed the code in SVN - please try again.

73's Phil....


 1239889629.0