[hpsdr] Penelope V1.2 - Power Output Indication in PowerSR

[Bill Tracey]

Power indication here seems correct for me on Ozy=16, Pen=12, 
Merc=27, PowerSDR = SVN 3336.   Can you measure the actual power 
output?  Suspect the PA settings was not 38 db when previous 
measurement was done?

Regards,

Bill (kd5tfd)

At 02:35 AM 8/20/2009, Gerd Loch wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
>Hi Bill,
>
>When "measuring" the output power of Penelope I find now with the actual
>V1.2 firmware on Penelope and Ozy 15 an output indication in PowerSDR
>which is different from that before on 160m.
>It shows now about 190mW where I had before an indication of 530mW. Also
>there is one LED less on indicating less power output. But I did not yet
>measure the real output.
>All PA settings are to 38dB.
>The older version of my Penelope firmware is of April 09 and was
>labelled V1.2 as well as far as I can remember.
>What could be the reason for it?
>
>Gerd, DJ8AY



 1251007135.0