[hpsdr] Issue with Penelopy

[K1rqg at aol.com]

Walter
 
I had same issue. Try Mercury in slot #6 (closest to pwr conn) then Ozy in  
#4, and Peny
in #1 or #2 .. makes a big difference on my Atlas buss. They are not all  
reacting the same.
 
73 de Joe
K1RQG
 
In a message dated 1/3/2009 5:59:18 P.M. Eastern Standard Time,  
walterh at k5wh.net writes:

*****  High Performance Software Defined Radio Discussion List *****




I  have Mercury working quite well, extremely nice sounding receiver…  Very  
well done guys. !! 
I  am having a problem with Penny though, that I hope is simple, as I have 
been  through the docs multiple times, and can’t seem to work around  this. 
With  Mercury and Janus on the Atlas board, the receiver seems to be just  
perfect. 
However,  if I plug Penny into the Atlas, when I Start up PowerSDR, I get a 
very high  noise level, almost to the top, and the AF control for volume no 
longer  functions, then it appears to lock up. Until I power down Atlas, and 
reload  PowerSDR, and the problem happens each time Start is  selected. 
I  have set the obvious, of selecting Penny for the 10Mhz clock, instead of  
Mercury, and also tried removing JP8 on Mercury to disable the 10mhz clock as  
well. 
Something  worth mentioning, is I see several error messages when Start is 
selected, like  it can’t load some of the drivers. But it scrolls by so fast, I 
can’t see the  details. I can’t seem to find a log anywhere of this history 
either. Is that  detail captured someplace ? 
I  have Janus in slot 2, Penny in slot 3, Merc in slot 5 of  Atlas. 
Anyone  have any ideas ? 
Many  thanks, 
Walter/K5WH  ...   





**************Stay up-to-date on the latest news - from fashion trends to 
celebrity break-ups and everything in between. 
(http://www.aol.com/?ncid=emlcntaolcom00000024)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20090103/bb9cb361/attachment-0003.htm>