[hpsdr] Remoting PowerSDR CAT via TCP/IP

[Eric Ellison]

Dan

 

WOW! What is next in the software phase?  Kind of an exiting ride!

 

Eric - AA4SW

 

 

 

From: hpsdr-bounces at lists.hpsdr.org [mailto:hpsdr-bounces at lists.hpsdr.org]
On Behalf Of Daniel Quigley
Sent: Saturday, January 10, 2009 3:36 PM
To: hpsdr at hpsdr.org
Subject: [hpsdr] Remoting PowerSDR CAT via TCP/IP

 

I prefer to dedicate a "main" PC as a station console to control the various
rigs and other equipment in my shack.   Personally I am comfortable with HRD
as a rig control interface and wanted to treat PowerSDR/HPSDR as another
rig.  PowerSDR has the feature to virtualize a COM port and respond to
serial CAT commands, however, my "main" PC, just does not have the
processing power or memory to do PowerSDR/HPSDR justice and still perform
well as my station console. 
 
I started looking into how I could remote PowerSDR from a seprate HPSDR PC.
Phil Covington added an experimental TCP Server to PowerSDR that would work,
however, adding his code into the PennyMerge branch and compiling it each
time Bill drops an update is ugly and too inefficient.  
 
A quick Google search located a commercial freeware virtual COM port and TCP
bridge software package by Eterlogic.  This seems to work very well.
 
http://www.eterlogic.com/Products.VSPE.html
 
Instructions:
Install the Eterlogic software on both PCs
 
On the HPSDR/PowerSDR machine:
1) Create a new virtual COM port (I used COM15), called a connector device
in Eterlogics app 
2) Create a new TcpServer device in Eterlogics (I just used the default TCP
port 5555).
3) Configure and enable CAT Control in PowerSDR (I used COM15, 57600 Baud,
N,8,1 and selected PowerSDR as the "ID as" value, you may want to use a
TS-2000 if your CAT control app does not support PowerSDR)
4) Note the IP address of the machine
 
On the machine running HRD (or other CAT control app):
1) Create a new virtual COM port (I used COM15 to stay consistent), called a
connector device in Eterlogics app 
2) Create a new TcpClient device in Eterlogics (select COM15 created above
and enter the IP address of the HPSDR machine using TCP port 5555).
3) Start HRD (or other CAT control software), select the correct device
(PowerSDR or other) and connect it to COM15
 
73,
Dan (N7HQ)
 
 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20090110/9f3749ca/attachment-0003.htm>