[hpsdr] Mercury Questions

[George]

After the first power cycle I see d3 (leftmost), d9, d10 and d11,
after the next and subsequent power cycles I see d3, d9 and d10.

On Monday 12 January 2009 01:22, Phil Harman wrote:
> No - preamp should be OK.
>
> So you loaded Mercury V1 - what Red LEDs are now lit on Mercury?
>
> Pihl...
>
> Quoting George <george at medakovich.com>:
> > (oops, sent to the wrong address...)
> >
> > No. Same results - I delete the mdb file, go through the wizard,
> > also set the 10mhz clock to mercury and start.  Level goes to -180dBm
> > in about 1 second and sits there.
> >
> > Is it possible I toasted the preamp?
> >
> > 73,
> > George, ae5ci
> >
> > On Sunday 11 January 2009 23:19, Phil Harman wrote:
> >> ***** High Performance Software Defined Radio Discussion List *****
> >>
> >> > If I reload v1, the two right-hand lights are steady on.
> >>
> >> George,
> >>
> >> That is correct, V1 does not have the LEDs flashing. With V1 loaded
> >> does Mercury work with Ozy?
> >>
> >> 73's Phil...VK6APH
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.

 1231780103.0