[hpsdr] Problems with Ozi.

[Bill Tracey]

Hi Willi,

This may be a configuration error.  Can you go 
into Setup and select SDR1000 as the hardware and 
check and see if  Janus/Ozy control is 
selected?  If it is selected unselect it and then 
set the hardware back to HPSDR.

If that does not do it let me know and I'll think some more on it.

Cheers,

Bill (kd5tfd)


At 04:33 AM 3/12/2009, Willi Reppel wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
>
>Hej all,
>I have two Ozi boards and one of them does not 
>perform as intended. When starting up HPSDR it 
>always goes immediately into transmit mode while 
>the other Ozi work normal and never starts in 
>transmit mode. Has anybody an idea what may cause this problem?
>Otherwise I am very pleased with my HPSDR rig 
>consisting of Atlas, Ozi, Penny and Mercury, 
>connected to a PA module for an Icom 750  which 
>a dealer here in Sweden had in stock as spare 
>part. The Icom module´s bandpass filters and PTT 
>are interfaced to and controlled by Penny´s seven open collector outputs.
>
>vy 73
>SM6OMH  Willi



 1236919130.0