[hpsdr] External keyer with HPSDR

[K1rqg at aol.com]

Steve
 
Just hook up your straight key or external keyer to OZY DB-9 (J-2) common  
to pin #5
and Key to pin #7 (Dit). Then in PowerSDR, go to SETUP> DSP> KEYER  and 
deselect
"Iambic". This should do it for you. Try it with Straight key first, then  
your external
keyer (to make sure it will key). You can then also use your straight key  
as PTT when 
in SSB (phone) mode. Also make sure you "Enable" break in on same setup  
page or
via main panel.
 
Good Luck
 
de Joe K1RQG
 
In a message dated 5/10/2009 12:40:52 A.M. Eastern Daylight Time,  
n5en at wt.net writes:

*****  High Performance Software Defined Radio Discussion List *****

I've  received my Penelope from Gerd and am preparing to test it.  I was  
reading the manuals and see that the Ozy manual (page 10) shows how to set up 
 Ozy to use PowerSDR's CW keyer, but what's the proper way to set up the 
system  to use an external CW keyer or a straight key?

Thanks
Steve  N5EN




**************The Average US Credit Score is 692. See Yours in Just 2 Easy 
Steps! 
(http://pr.atwola.com/promoclk/100126575x1222376999x1201454299/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=M
ay51009AvgfooterNO62)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20090510/9fd122b9/attachment-0003.htm>