[hpsdr] ghpsdr startup

[n3evl]

Ken,

Thanks for the info but I suspect that's not the problem - my HPSDR 
boards are not 'new' - I've been using them on Windows with PowerSDR for 
a while now - I'm listening on 20m with Mercury now, back on Windows 
XP.  My boards are already configured via the quartus s/w:

Ozy FX2: 20090524
Ozy: 17
Mercury: 28
Penelope: 12

The only difference I saw with what you sent was Mercury at version 29.  
Maybe v29 is required for ghpsdr?

Pete, N3EVL



Ken N9VV wrote:
> Hi Pete, you must use USBbypteBlaster code from the Ozy to load your 
> new Mercury and new Penelope. The process is pretty easy, but you must 
> follow their instructions. *BE SURE TO INSTALL JUMPER J7* on both the 
> Mercury and Penelope. Get the latest USBByteBlaster from the SVN:
> svn://64.245.179.219/svn/repos_sdr_hpsdr/trunk/USBBlaster-Binaries
>
> Let me know if you have any trouble. It is a very strange task for a 
> new guy like me :-) I just SUCCESSFULLY finished up the firmware on my 
> Penelope. Great Tx now :-)
>
> Ken
>
>


 1270426710.0