[hpsdr] Alex update from Toroid Hell

[Tim O'Rourke]

I would volunteer to do my own a few extra sets, I can verify values as I go.
Tim W4YN


-----Original Message-----
>From: "Rajiv Dewan, N2RD" <n2rd at arrl.net>
>Sent: Aug 25, 2010 5:05 PM
>To: Scott Cowling <scotty at tonks.com>
>Cc: hpsdr at openhpsdr.org
>Subject: Re: [hpsdr] Alex update from Toroid Hell
>
>***** High Performance Software Defined Radio Discussion List *****
>
>Any chance, you could let us fix the the toroids ourselves after we get a partially assembled kit?
>Raj
>
>
>On Aug 25, 2010, at 12:49 PM, Scott Cowling wrote:
>
>> ***** High Performance Software Defined Radio Discussion List *****
>> 
>> Hi Dan & patient Alex co-sufferers,
>> 
>> Here is the current state of Alex...
>> 
>> We received all of the toroids. There are 22 different core/turns combinations.
>> 
>> Of the 22 types:
>> 4 are wound on the incorrect cores (70% - 85% to high in permeability)
>> 8 others measure out of inductance tolerance by more than 10%
>> 10 are useable with no circuit changes
>> 
>> Graham is evaluating the filters containing the 8 out-of-tolerance inductors to see if he can tweak the values of the other components to compensate for the larger inductance. If not, we have an alternate plan to modify these 8 toroids locally to remove one or more turns, strip and re-tin the wires to get the inductance to where it needs to be.
>> 
>> On the 4 that are wound on the incorrect cores, the manufacturer has agreed to re-wind these on the correct cores. However, even this inductance is proving to be 15% to 30% too high, so Graham is evaluating that impact so that we can adjust the number of turns to get the target inductance.
>> 
>> Graham's work should be complete next week. We can then get the CM started on the rewinding and we can modify any of the 8 others that we need to.
>> 
>> I do not have a timetable for the rewinding, but I'll post an update once we get a commitment from the CM.
>> 
>> Sorry it has take so long, but we are maintaining our quality standards (such as they are) by being very careful with these. I would hate to have 400 assembled units in my warehouse that had defective filters due to incorrect inductance values. Almost as much as you would hate to have one hooked up to your antenna. :-)
>> 
>> I should have another update (maybe even new toroids!) by DCC.
>> 
>> You are going to DCC, right???? This year's line-up is looking pretty impressive, and Vancouver, WA (across the river from Portland, OR) is very nice. Steve assures me that the schedule will be up shortly at:
>> 
>> http://www.tapr.org/dcc.html#intro
>> 
>> The Sunday seminar alone is worth going for: Rick Muething KN6KB will be talking about DSP Tools, Techniques and Tips. This is a 4-hour seminar on how to get started in DSP. If you are interested in DSP but don't quite know how to get started, this one's for you.
>> 
>> 
>> 73,
>> Scotty WA2DFI
>> 
>> At 06:25 2010-08-25 -0700, Dan Mitchell wrote:
>>> ***** High Performance Software Defined Radio Discussion List *****
>>> 
>>> Is there any recent news on how TAPR is doing with the Alex?
>>> Dan, W0IQ
>> 
>> 
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
>_______________________________________________
>HPSDR Discussion List
>To post msg: hpsdr at openhpsdr.org
>Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>HPSDR web page: http://openhpsdr.org
>Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/


Tim O'Rourke 
W4YN at ARRL.Net
Low Power Amateur Radio Rocks 
Member of Flying Pigs,ARCI,GQRP,RSGB,ARRL Life Member
NHRA Life Member

 1282788096.0