[hpsdr] ghpsdr installation on Ubuntu 9.10

[ENDO]

Hi All,

USB data transfer failed:
ozy_ep6_ep2_io_thread: OzyBulkRead read failed -7
ozy_ep6_ep2_io_thread: OzyBulkRead read failed -7

Could someone give me an idea to resold the problem?

The following is the list;
tokio at tokio-desktop:~/ghpsdr/bin$ ./ghpsdr
ghpsdr Version 0.3
setup_system_audio: sdr-3346-0
setup_system_audio: sdr-3346-1
setup_system_audio: sdr-3346-2
libusb_get_ozy_firmware failed: -7
Failed to get Ozy Firmware Version - Have you run initozy yet?
exec initozy
usb_find_busses returned: 5
usb_find_devices returned: 7
ResetCPU(true).......returns 1
HPSDR_UploadFirmware: Processed 742 lines.
UploadFirmware('ozyfw-sdr1k.hex')......returns 742
ResetCPU(false).......returns 1
usb_find_busses returned: 5
usb_find_devices returned: 7
111083 bytes transferred.
LoadFPGA succeeded!
usb_find_busses returned: 5
usb_find_devices returned: 7
 ***** Write to I2C Failed ***** I2C Bytes written = 0
usb_find_busses returned: 5
usb_find_devices returned: 7
 ***** Write to I2C Failed ***** I2C Bytes written = 0
usb_find_busses returned: 5
usb_find_devices returned: 7
 ***** Write to I2C Failed ***** I2C Bytes written = 0
usb_find_busses returned: 5
usb_find_devices returned: 7
 ***** Write to I2C Failed ***** I2C Bytes written = 0
usb_find_busses returned: 5
usb_find_devices returned: 7
 ***** Write to I2C Failed ***** I2C Bytes written = 0
usb_find_busses returned: 5
usb_find_devices returned: 7
 ***** Write to I2C Failed ***** I2C Bytes written = 0
usb_find_busses returned: 5
usb_find_devices returned: 7
 ***** Write to I2C Failed ***** I2C Bytes written = 0
usb_find_busses returned: 5
usb_find_devices returned: 7
I2C Bytes written = 2
usb_find_busses returned: 5
usb_find_devices returned: 7
I2C Bytes written = 2
usb_find_busses returned: 5
usb_find_devices returned: 7
I2C Bytes written = 2
usb_find_busses returned: 5
usb_find_devices returned: 7
I2C Bytes written = 2
usb_find_busses returned: 5
usb_find_devices returned: 7
I2C Bytes written = 2
usb_find_busses returned: 5
usb_find_devices returned: 7
I2C Bytes written = 2
usb_find_busses returned: 5
usb_find_devices returned: 7
I2C Bytes written = 2
usb_find_busses returned: 5
usb_find_devices returned: 7
I2C Bytes written = 2
usb_find_busses returned: 5
usb_find_devices returned: 7
I2C Bytes written = 2
wait status=0
Ozy FX2 version: 20090524
iphone_thread
iphone_thread: listen
iphone_thread: accept
audio_stream_thread
audio_stream_thread: listen
audio_stream_thread: accept
ozy_ep6_ep2_io_thread: OzyBulkRead read failed -7
ozy_ep6_ep2_io_thread: OzyBulkRead read failed -7
tokio at tokio-desktop:~/ghpsdr/bin$

-----Original Message-----
From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org]On Behalf Of ENDO
Sent: Saturday, March 20, 2010 3:03 PM
To: hpsdr at lists.openhpsdr.org
Subject: Re: [hpsdr] ghpsdr installation on Ubuntu 9.10


***** High Performance Software Defined Radio Discussion List *****

Hi All,

After updating Ubuntu 9.10 (now Linux 2.6-31-20), then re-install libusb1.0,
ghpsdr started.
But it doesn't work;
LTC2208 Overflow without connection of antenna.
Intermittent strong signal on the screen.
On the commnad screen, series of Mercury software version and vfo transmit 0
or 1 statement never stop.

My Mercury firmware is 2.7.
Is it OK?

Regards,

Tokio ENDO
JA1CCA

-----Original Message-----
From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org]On Behalf Of ENDO
Sent: Saturday, March 20, 2010 7:53 AM
To: hpsdr at lists.openhpsdr.org
Subject: [hpsdr] ghpsdr installation on Ubuntu 9.10


***** High Performance Software Defined Radio Discussion List *****

Hi All,

I try to install ghpsdr 32bit version on Ubuntu 9.10, but "Cannot locate
Ozy!" message appeared.

The following is what I did;

1. Download the files from svn co
svn://64.245.179.219/svn/repos_sdr_hpsdr/trunk/N6LYT/ghpsdr as indicated
ghpsdr wiki.
2. According to README, building ghpsdr.
3. Create 90-ozy.rules in /etc/udev/rules.d and add the code:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="fffe", ATTRS{idProduct}=="0007",
SYMLINK+="ozy", MODE="666"

4. Run ghpsdr in bin, then "Cannot locate Ozy!" message.

My PC is Dell 8400 P4 3.0GHT.

Thank you in advance for your help.

Tokio
JA1CCA

---------------------
Etre respecte n'est pas importnat, ce qui est important c'est d'etre
respectable.

_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help:
http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/

_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help:
http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/


 1269071342.0