[hpsdr] METIS PROBLEM - Direct PC Connection

[Georg Prinz]

Hello Hans,

if you have two IP ports on your computer, be aware that they cannot be
at the same subnet! You have to choose IP-addresses for eth0 and eth1
which point to two different subnets!

73, Georg, dl2kp




On Mi, 2011-04-20 at 19:03 +0800, Phil Harman wrote:
> ***** High Performance Software Defined Radio Discussion List *****
> 
> Hi Hans,
>  
> Check that you can ping your Metis board.  Its APIPA IP address will
> be 169.254.X.Y where X and Y are the last two bytes of the MAC address
> of your Metis board.
>  
> You can use HPSDRProgrammer to get the MAC address (just do a
> Discovery and its automatically displayed). So for example lets say
> your MAC address is 
>  
> 00:09:F6:55:5E:8E 
>  
> then the IP address will be 169.254.95.142
>  
> If you are still having problems then do a Wireshark trace when
> starting PowerSDR and send me the file. 
>  
> 73 Phil....VK6APH 
>  
>  
>         ----- Original Message ----- 
>         From: Hans J Smit 
>         To: hpsdr at openhpsdr.org 
>         Sent: Wednesday, April 20, 2011 12:01 PM
>         Subject: [hpsdr] METIS PROBLEM - Direct PC Connection
>         
>         
>         ***** High Performance Software Defined Radio Discussion List
>         *****
>         
>         
>         
>         
>         ______________________________________________________________
>         
>          
>         
>         
>         I'm experiencing a problem when I power up with Metis.
>         I get the "Limited Connectivity" message from WinXP, and
>         "details" show IP address 169.254.163.71
>         Metis is connected directly to the PC with a CAT 5 cable.
>         LED 0 shows SLOW flashing - 100T
>         LED 6 shows FAST flashing - DHCP timeout
>         LED 12 shows "Heartbeat" OK.
>         When PowerSDR is started, after a while, the "Error Starting
>         HPSDR" message appears.
>         Also, LED  9 is ON.
>         I'm using PowerSDR v1.19.3.3 (W5WC - 3/6/11) downloaded from
>         the HPSDR website.
>         It all works OK when using OZY
>         Have I missed something?
>         Hans VK5YX
>         
>         ______________________________________________________________
>         
>         _______________________________________________
>         HPSDR Discussion List
>         To post msg: hpsdr at openhpsdr.org
>         Subscription help:
>         http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>         HPSDR web page: http://openhpsdr.org
>         Archives:
>         http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/ 
>         
>         
>         ______________________________________________________________
>         
>         No virus found in this message.
>         Checked by AVG - www.avg.com
>         Version: 10.0.1321 / Virus Database: 1500/3581 - Release Date:
>         04/18/11
>         
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/



 1303328146.0