[hpsdr] Problems with PowerSDR v 1.19.3.4, on TX

[Bernd Gasser]

Hi Pedro,

Regarding (2) - I had the same issues until I used a separate pair of
virtual COM-port for PTT control between DM780 and PowerSDR. I’ also running
PowerSDR v 1.19.3.4 here. (Btw, one note, as this hit me at the beginning -
‘Receive-only’ of course needs to be un-checked in PSDR.)

 

73, 

Bernd/OE1ACM

 

From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of pedro Garcia
Sent: Sonntag, 7. August 2011 13:28
To: hpsdr at lists.openhpsdr.org
Subject: [hpsdr] Problems with PowerSDR v 1.19.3.4, on TX

 

Hi all,
I got some problems when running PowerSDR version 1.19.3.4.
1 .- VOX does not operate via VAC nor connecting the microphone to the
Penelope board.
2 .- Another problem is that I work in digital modes with  HPSDR  and DM780,
I connect  PowerSDR with Ham Radio Deluxe via  virtual serial port with  the
program VSPE, and works good, but PowerSDR doesn´t transmit automatically
when DM780 start the transmission, in PowerSDR v 1.19.3.3, performs good,
although the audio is better in PowerSDR v 1.19.3.4.

73, Pedro.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20110808/ee1a93d2/attachment-0004.htm>