[hpsdr] Error message on starting PowerSDR now (Metis)...

[Bill Tracey]

In theory PowerSDR should be looking at any and all NICs when it does 
the Metis discovery broadcast, so no need to tell it where to 
look.    I've only got one NIC in my radio PC at the moment so I've 
never actually tested this bit of theory (I feel a Fry's field trip 
coming on...).

To debug further - can you run:
         PowerSDR.exe 2>&1 > runlog.txt
for your scenario and send me the resulting runlog.txt.

The other thing to debug it is to install Wireshark 
(www.wireshark.org) and sniff the network adapter Metis is attached 
to.  Save the capture as .pcap file and send it to me and I'll take a 
look at it.   This will tell us what's going out/coming in on the wire.

Regards,

Bill (kd5tfd)


At 04:59 PM 2/18/2011, n3evl wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
>I'm wondering if this is an issue with identifying the correct 
>Network Interface - I noticed that when I started KK initially, it 
>was pointing to the wrong NIC so I selected the other (correct one 
>that is dedicated to HPSDR) and KK started normally.  There does not 
>appear to be any way to tell which NIC PowerSDR is using and there 
>is no equivalent setup box in which to point it at a particular 
>NIC.  I'm wondering if it saw them in a different order last time, 
>when it was working and maybe always picks the first one it sees - 
>just a thought.
>
>Pete, N3EVL



 1298073205.0