[hpsdr] Re : Penny FPGA Load

[John Melton]

Hi Gordon,

if you can send it to me and Phil off the list that would be great.

Just run wireshark collecting packets on the interface that Metis is
connected to and then run HPSDRProgrammer.  Stop the data collection and
then save the file (File type wireshark/tcpdump if it allows you to
select) and then send the files as an attachment.

Regards,

John g0orx/n6lyt


On Thu, 2011-07-14 at 17:22 -0400, Gordon & Lois Duff wrote:
> ***** High Performance Software Defined Radio Discussion List *****
> 
> Phil Harman wrote "It seems as if George is doing things correctly,
> his EEPROM on Penny appears to be loading correctly according to the
> LEDs and HPSDRProgrammer prompts but still the chip does not load.
> 
>  
> 
> We really need a WireShark trace to see what is going wrong."
> 
>  
> 
> I think Phil meant "Gordon", not "George", but as we are getting into
> "Alice in Wonderland", who knows?  My boards are installed in the
> correct sequence by all definitions.
> 
>  
> 
> Who needs to see WireShark output and what do they want to see.  I
> have WireShark and am vaguely acquainted with it.  
> 
>  
> 
> BTW, I hope this hope exercise is not some stupid mistake on my part,
> but then the instructions can be improved for all? :)
> 
>  
> 
> Gordon
> 
>  
> 
>  
> 
>  
> 
> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/



 1310679306.0