[hpsdr] Metis - what am I doing wrong?!
Berndt Josef Wulf
wulf at ping.net.au
Fri Mar 11 06:42:05 PST 2011
G'day Chris,
are you trying to access Metis using WiFi? I'm asking, because I see this
behavior when trying to access Metis through a wireless access point. In this
case HPSDRProgrammer discovery works, but PowerSDR can't connect to it.
73, Berndt
VK5ABN
On 12/03/11 Chris Smith wrote:
***** High Performance Software Defined Radio Discussion List *****
Hi Berndt
OK - I think that is simply a different branch but it doesn't cure my problem
as V1.19.3 displays exactly the same symptoms.
Back to the drawing board!
Cheers
Chris
On 11 Mar 2011, at 14:02, Berndt Josef Wulf wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> G'day Chris,
>
> I've downloaded the binaries from the OpenHPSDR.org website, which are more
> recent than the one you mentioned in the original email.
>
> cheerio Berndt
>
>
> On 12/03/11 Chris Smith wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
>> Hi Berndt
>>
>> Now you have me worried. I just did an SVN update on the PowerSDR folder
and
> nothing newer than the version I'm running was downloaded. So where are the
> versions you mention?
>>
>> Cheers
>>
>> Chris
>>
>> On 11 Mar 2011, at 13:09, Berndt Josef Wulf wrote:
>>
>>> ***** High Performance Software Defined Radio Discussion List *****
>>>
>>> G'day Chris,
>>>
>>> have you tried with a later version of PowerSDR? I've been successful in
> using
>>> PowerSDR 1.16.3 and PowerSDR 1.19.3 and Metis V1.1
>>>
>>> cheerio Berndt
>>>
>>> On 11/03/11 Chris Smith wrote:
>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>
>>>> Hi John
>>>>
>>>> I haven't downloaded WireShark yet but in answer to your question: there
> is
>>> only one NIC on the PC and the port on the switch that this connects to
> shows
>>> a 10Base1000 connection.
>>>>
>>>> A clarification: D20 LED(9) only comes on when Metis responds to a
> discovery
>>> packet from either HPSDRProgrammer or PowerSDR otherwise it remains OFF
> after
>>> a power cycle.
>>>>
>>>> I'm off to the shack again to run WireShark though I feel that the
> behaviour
>>> of D20 indicates that PowerSDR and Metis are talking to each other at
> least in
>>> the discovery phase. It appears to be after that that things go wrong.
>>>>
>>>> Cheers & 73
>>>>
>>>> Chris G4NUX
>>>>
>>>>
>>>> On 11 Mar 2011, at 12:44, John Melton wrote:
>>>>
>>>>> Hi Chris,
>>>>>
>>>>> everything sounds OK with Metis and DHCP and HPSDRProgrammer.
>>>>>
>>>>> I do not use PowerSDR so cannot comment on it, but you could try running
>>>>> WireShark to capture the packets. You should see PowerSDR send a
>>>>> discovery packet (to address 255.255.255.255) and then see a response
>>>>> from Metis. As HPSDRProgrammer is working you could also watch this
>>>>> with WireShark as well.
>>>>>
>>>>> Do you have more than 1 network interface on the PC?
>>>>>
>>>>> -- John g0orx/n6lyt
>>>>>
>>>>>
>>>>> On Fri, 2011-03-11 at 12:07 +0000, Chris Smith wrote:
>>>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>>>
>>>>>> Hmmm...
>>>>>>
>>>>>> Having shaken off Montezuma, at least to the extent that I feel safe
>>> disappearing down the garden to my shack, I installed Metis and a new
> Netgear
>>> GS105 5 port gigabit switch. Installation is as per Figure 2 on page 5 of
>>> Metis user manual.
>>>>>>
>>>>>> On power up of the hardware Metis appears to get an IP address from my
>>> DHCP server and the LEDs settle down to:
>>>>>>
>>>>>> 14 Slow flash
>>>>>> 15 Occasional/random flash
>>>>>> 16 -
>>>>>> 17 Occasional/random flash
>>>>>> 22 -
>>>>>> 12 -
>>>>>> 11 ON
>>>>>> 13 -
>>>>>> 21 -
>>>>>> 20 ON
>>>>>> 19 -
>>>>>> 18 -
>>>>>> 23 2Hz flash (heart-beat?)
>>>>>>
>>>>>> John's HPSDRProgrammer is able to discover Metis and shows me a MAC
>>> address and the IP address supplied by my DHCP server - IP is in the
> correct
>>> range.
>>>>>>
>>>>>> So far so good. I ran PowerSDR (KD5TFD 2Feb2011b) and selected
> Connection
>>> Type Metis (Ethernet) in Setup and Apply but the Metis Address IP & MAC
>>> addresses both remain steadfastly at all zeros.
>>>>>>
>>>>>> I dismissed PowerSDR and cycled power on the hardware (later I even
>>> restarted WinXP) but on starting up PowerSDR again the Metis Address still
>>> shows all zeros and trying to Start PowerSDR gets me, after a several
> second
>>> delay, a message to the effect that HPSDR hardware was not detected and
> was it
>>> connected and powered on? PowerSDR also shows all the installed boards as
>>> having version zero installed.
>>>>>>
>>>>>> Wondering if I needed Metis_V1.1 I successfully ran HPSDRProgrammer and
>>> installed V1.1 though I haven't been able to verify that that is what is
>>> loaded on Metis.
>>>>>>
>>>>>> I've read and re-read the Metis user manual until I can almost recite
> it
>>> verbatim but can't see what I might be doing wrong.
>>>>>>
>>>>>> It appears that although HPSDRProgrammer can see Metis PowerSDR can't.
>>>>>>
>>>>>> Help - please!
>>>>>>
>>>>>> Cheers & 73
>>>>>>
>>>>>> Chris G4NUX
>>>>>>
>>>>>> On 11 Mar 2011, at 08:05, Chris Smith wrote:
>>>>>>
>>>>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>>>>
>>>>>>> Parcelforce were as good as their word and Metis arrived safely
>>> yesterday. Unfortunately I've been struck down with Montezuma's Revenge
> for
>>> the past couple of days so have be able to do nothing but look longingly
> at
>>> the unopened anti-static bag. :-)
>>>>>>>
>>>>>>> Cheers & 73
>>>>>>>
>>>>>>> Chris G4NUX
>>>>>>>
>>>>>>> On 10 Mar 2011, at 23:26, Paul Fletcher wrote:
>>>>>>>
>>>>>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>>>>>
>>>>>>>> Mine is awaiting payment of duty so it's in the UK somewhere.
>>>>>>>>
>>>>>>>> ----- Original Message ----- From: "Steven Doyle"
>>> <steve_doyle at o2.co.uk>
>>>>>>>> To: <hpsdr at lists.openhpsdr.org>
>>>>>>>> Sent: Thursday, March 10, 2011 9:24 PM
>>>>>>>> Subject: Re: [hpsdr] Metis
>>>>>>>>
>>>>>>>>
>>>>>>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> Metis arrived safely today in Blighty.
>>>>>>>>>
>>>>>>>>> After installing it, I then used HPSDRProgrammer to update to the
>>> latest firmware(Metis V1.1) and then proceeded to update the firmware on
>>> Mercury to v6.4(Diversity) & Penelope to v1.3.
>>>>>>>>>
>>>>>>>>> Everything worked first time :)
>>>>>>>>>
>>>>>>>>> Many thanks to everyone involved.
>>>>>>>>>
>>>>>>>>> 73s
>>>>>>>>>
>>>>>>>>> Steve
>>>>>>>>> G1YLB
>>>>>>>>>
>>>>>>>>> -----Original Message----- From: Chris Smith
>>>>>>>>> Sent: Wednesday, March 09, 2011 1:21 PM
>>>>>>>>> To: hpsdr at lists.openhpsdr.org
>>>>>>>>> Subject: Re: [hpsdr] Metis
>>>>>>>>>
>>>>>>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>>>>>>
>>>>>>>>> Ah-ha! I've just paid the import VAT on Metis and Parcelforce are
>>> promising delivery tomorrow (Thur 10th Mar). Not bad - payment was taken
> 26th
>>> Feb so 12 days from payment to delivery.
>>>>>>>>>
>>>>>>>>> Many thanks TAPR and everyone involved.
>>>>>>>>>
>>>>>>>>> Cheers & 73
>>>>>>>>>
>>>>>>>>> Chris G4NUX
>>>>>>
>>>>>> _______________________________________________
>>>>>> HPSDR Discussion List
>>>>>> To post msg: hpsdr at openhpsdr.org
>>>>>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-
>>> openhpsdr.org
>>>>>> HPSDR web page: http://openhpsdr.org
>>>>>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> HPSDR Discussion List
>>>> To post msg: hpsdr at openhpsdr.org
>>>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-
>>> openhpsdr.org
>>>> HPSDR web page: http://openhpsdr.org
>>>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>>>
>>> _______________________________________________
>>> HPSDR Discussion List
>>> To post msg: hpsdr at openhpsdr.org
>>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-
> openhpsdr.org
>>> HPSDR web page: http://openhpsdr.org
>>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>>
>>
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-
> openhpsdr.org
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-
openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
1299854525.0
More information about the Hpsdr
mailing list