[hpsdr] Metis not found

[John Melton]

Not sure I understand what you are saying.

You have 2 interfaces eth0 and eth1. The Metis card is oneth0 interface.
Does the Metis card get a DHCP address when it is on that interface?

Can you send me the output from running "./server --metis"?
 
-- John

On Thu, 2011-03-24 at 13:08 +0100, Georg Prinz wrote:
> Hi,
> 
> now I am a step further. You cannot connect two ports to the same
> subnet. Therefore, /etc/network/interfaces was edited as follows:
> 
> 
> #Loopback interface
> auto lo
> iface lo inet loopback
> 
> #Metis interface
> auto eth0
> iface etho inet static
> address 192.168.2.10
> netmask 255.255.255.0
> 
> #Primary interface
> auto eht1
> iface eth1 inet dhcp
> 
> 
> Running "./server --metis", it recognizes the IP and MAC address, but
> says "Found 0 Metis cards". When both addresses are correct, than Metis
> is already communicating with the server, isn't it?
> 
> I am running win7 x64 kubuntu 10.10.
> 
> Any idea?
> 
> 
> Vy73, dl2kp
> 
> 
> On Mi, 2011-03-23 at 09:34 +0000, John Melton wrote:
> > On Tue, 2011-03-22 at 23:37 +0100, Georg Prinz wrote:
> > > Hi John,
> > 
> > > Connecting  metis to the router, I get the message " listening for TCP
> > > connection on port 1100". This port isn't mentioned in any docs.
> > > 
> > 
> > Look at N6LYT/ghpsdr3/trunk/doc/protocols.pdf
> > 
> > -- John
> > 
> > 
> 
> 



 1300975163.0