[hpsdr] Metis Firmware Updating

[Tokio Endo]

Hi All,

Updating Metis by Quartus Programmer is done WITH SUCCESS.

I made a wrong conncetion of 10P cable. It's OK with J6 10P SCONFIG.

The firmware versions are now Mercury 3.3, Penelope 1.7 and Metis 2.2.

The email of Bob, K4QQK, whose title is Simple Procedure for Quickly
Updating Firmware on Mercury, Pennylane and Other HPSDR Boards was of great
help.

73,
Tokio Endo
JA1CCA

  -----Original Message-----
  From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org]On Behalf Of Tokio Endo
  Sent: Monday, December 17, 2012 10:53 PM
  To: hpsdr at lists.openhpsdr.org
  Subject: [hpsdr] Metis Firmware Updating


  Hi All,

  I tried to update Metis by HPSDR Programmer on the HPSDR Downloads, but
failed. Erase doesn't work due to timeout.
  Program seems to work since there are correct messages displayed. But the
firmware not changed.

  By using QUARTUS Programmer with Altera USB Blaster, I have a message
Can't recognize silicon ID for device 1.

  The only way to update the firmware is  Program-Mercury-EPCS16 as well as
Program-Penelope-EPCS4 by using USB Blaster based on the manual of Phil
Harman dated on 18 May 2009.

  Could anybody tell me a method of updating the firmware of Metis?

  73
  Tokio Endo
  JA1CCA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20121217/2983b3e9/attachment-0004.htm>